Xerox WorkCentre M24-2780 - Manual (Page 428)

5–22
U S E R G U I D E (T R O U B L E S H O O T I N G )
016-701 • Cause - PCL print data could not be processed due to
insufficient memory.
• Remedy - Lower the resolution, or instruct printing again
without setting 2 Sided printing or N Up.
016-702 • Cause - PCL print data could not be processed due to
insufficient space in the print page buffer.
• Remedy - Set Print Mode to Speed Priority, or use Ensure
Print, or increase the size of the print page buffer, or add
memory.
016-735 • Cause - An attempt was made to print a job template while it
was being updated.
• Remedy - Wait a while before instructing printing again.
016-737 • Cause - An error occurred during reading of data from the job
template pool server.
• Remedy - Check the access rights of the directory to which
the job template is stored.
016-739 • Cause - Could not find the specified job template pool server.
• Remedy - Check the path name to the job template pool
server.
016-740 • Cause - Could not log into the job template pool server.
• Remedy - Check the login user name, password, and other
information.
016-741 • Cause - Could not connect to the job template pool server.
• Remedy - Ask the network administrator to check the
network environment or server environment.
016-742 • Cause - The job template could not be stored to memory due
to insufficient hard disk space.
• Remedy - Delete unwanted data from the hard disk to
increase hard disk space.
016-743 • Cause - The settings on the job template pool server are
incorrect.
• Remedy - Check the settings of the job template pool server.
016-748 • Cause - Printing is not possible due to insufficient hard disk
space.
• Remedy - Reduce the number of pages of print data, for
example, by dividing up the print data or printing one copy at
a time when making multiple copies.
Fault Code Cause/Remedy