Xerox WorkCentre M24-2780 - Manual (Page 296)

3–6
U S E R G U I D E (S C A N )
Output Color
Output Color allows you to define the kind of original document
you wish to scan. The default is Auto.
The following options are available:
Auto The Auto Color option enables the copier to determine if the
document is black and white or color.
The DADF must be closed for the Auto option to function. In order
for the scanner to accurately sense color on a document, the color
area must be greater than 50 mm
2
(approximately 2 inches
2
). If
the color area is less, select the Full Color option. Very dark
colors may be sensed as black. In this case, select the Full Color
option as well.
Full Color Best used when scanning color originals. The text in the
document will be clearer, and the color graduation will be
represented in greater detail.
Grayscale Select when scanning originals with different shades of black and
white. This option can be used for originals that cannot be
scanned in black and white only.
Black Select when the desired output is a black and white copy. Black
and white copies can be made from any original. With Black
selected only Black toner is used.