Xerox WorkCentre M24-2780 - Manual (Page 369)

4–35
U S E R G U I D E (M A C H I N E A D M I N I S T R A T O R )
Contrast This sets up the default for Contrast in Light/Dark/Contrast on the
Image Quality screen.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 2, Normal.
Sharpness This sets up the default for Sharpness in Sharpness/Saturation on
the Image Quality screen.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 2, Normal.
Setting Description
0 Higher
1 High
2 Normal
3 Low
4 Lower
Setting Description
0 Sharper
1 Sharp
2 Normal
3 Soft
4 Softer