Configuring the client for scanning, Installing the network scanner utility, Required environment – Xerox WorkCentre M24-2780 User Manual
Page 323: Configuring the client for scanning 3-33, Installing the network scanner utility 3-33, Required environment 3-33, Configuring the client for scanning 33, Installing the network scanner utility 33, Required environment 33
3–33
U
S E R
G
U I D E
(S
C A N
)
Configuring the Client for Scanning
You need to install the scanner driver on your client workstation to
retrieve scanned documents directly from the Printer’s Mailboxes
into an image editing application.
Installing the Network Scanner Utility
Network Scanner Utility allows you to access stored data in the
mailbox from a client. This section describes the installation and
uninstallation of the Network Scanner Utility using the Driver/
Network Utility CD.
Required Environment
To install Network Scanner Utility, a client must meet the following
requirements:
Target Operating System
•
Microsoft Windows 95/98/ME
•
Microsoft Windows NT version 4.0/2000/XP
NOTE:
Windows NT Server TSE (Terminal Server Edition) and
Windows 2000 Server/Advanced Server Terminal Service are not
compatible with this feature.
Client Workstation
•
i486DX4/100 MHz processor or above (Pentium 100 MHz or
above is recommended.
•
32 MB memory.
•
40 MB or more of free hard disk space (not including space for
scanned data).
Network
A client must be connected to a network and be able to
communicate with the TCP/IP protocol.
Target Application
Software
To import the data stored in the mailbox to application software,
the software must be compatible with the TWAIN interface.