Xerox WorkCentre M24-2780 - Manual (Page 117)

1–75
U S E R G U I D E (C O P I E R )
1
On the Scan Options tab select Original Size.
2
Perform one of the following:
• Select Auto Size Detect to have the copier identify the size of
the original document.
• Select the appropriate size of the document from one of the
preset size buttons.
• Enter the width (X) and length (Y) dimensions of the original
document.
•
Press the arrow buttons to decrease or increase the X and
Y dimensions. X dimensions range from 15 to 432mm in 1
mm increments. Y dimensions range from 15 to 297mm in
1 mm increments.
3
Select Start to make copies or Save to select additional features.