Xerox WorkCentre M24-2780 - Manual (Page 345)

4–11
U S E R G U I D E (M A C H I N E A D M I N I S T R A T O R )
Non-Copy Job Complete
Tone
Sets the tone when a job other than copying has been completed
successfully. It can be set to:
• Off
• Soft
• Normal
• Loud
The default is Normal.
Fault Tone Sets the tone when a fault occurs and the job is held in a faulted
state. It can be set to:
• Off
• Soft
• Normal
• Loud
The default is Normal.
Alert Tone Sets the tone when a job finishes abnormally. It can be set to:
• Off
• Soft
• Normal
• Loud
The default is Off.
Low Toner Alert Tone Sets the tone when the Drum Cartridge or Toner Cartridge has to
be replaced. It can be set to:
• Off
• Soft
• Normal
• Loud
The default is Normal.