Xerox WorkCentre M24-2780 - Manual (Page 365)

4–31
U S E R G U I D E (M A C H I N E A D M I N I S T R A T O R )
Margin Shift - Side 2 This sets up the default for Side 2 in Margin Shift on the Added
Features screen.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 10, Symmetrical with Side 1.
Border Erase - Top &
Bottom
This sets up the default for the top and bottom Border Erase.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 5mm.
Setting Description
0 No Shift
1 Auto Center
2 Corner Shift (Top Right)
3 Corner Shift (Bottom Right)
4 Corner Shift (Top Left)
5 Corner Shift (Bottom Left)
6 Corner Shift (Top Center)
7 Corner Shift (Bottom Center)
8 Corner Shift (Left Center)
9 Corner Shift (Right Center)
10 Symmetrical with Side 1
Setting Description
0 None
1 ~ 50 Set the border erase
amount in increments
of 1mm