Xerox WorkCentre M24-2780 - Manual (Page 387)

4–53
U S E R G U I D E (M A C H I N E A D M I N I S T R A T O R )
Setting the Scan Size Defaults
Set the sizes displayed on the Scan Size screen under the Scan
Options tab. Any scan size can be assigned to Scan Size buttons
1 ~ 11, except for Auto Size Detect.
Setting frequently used scan sizes will prevent you from having to
enter scanning size each time you scan. When entering non-
standard sizes, set the size between 15 ~ 432 mm for the X
direction, and 15 ~ 297 mm for Y direction, in increments of 1mm.
Scan Size 1 ~ 11 The following table shows the sizes that can be set to scan size
defaults. Select a button, and choose a size.
The defaults are as follows. 5.5x8.5 in. LEF, 5.5x8.5 in. SEF,
8.5x11 in. LEF, 8.5x11 in. SEF, 8.5x14 in., 11x17 in., A4 LEF, A4
SEF, A3, 3.5x5 in., 5x7 in.
Setting Description
A/B Series Size A3, A4 SEF, A4 LEF, A5 SEF, A5 LEF, A6 SEF, A6
LEF, B4, B5 SEF, B5 LEF, B6 SEF, B6 LEF
Inch Size 11x17 in., 11x15 in., 8.5x14 in., 8.5x13 in., 8.5x11 in.
SEF, 8.5x11 in. LEF, 5.5x8.5 in. SEF, 5.5x8.5 in. LEF
Others 5x7 in., 3.5x5 in., 8K, 16K SEF, 16K LEF
Variable Setting ranges are: 15 ~ 432 mm for X direction, 15 ~
297 mm for Y direction in 1mm increments