Xerox WorkCentre M24-2780 - Manual (Page 126)

1–84
U S E R G U I D E (C O P I E R )
Stored Jobs
The Stored Jobs feature allows you to program various feature
settings in the built-in copier memory as a single job. Up to 8 jobs
can be stored and up to 18 characters can be entered for each job
name. This feature is especially helpful for complex jobs that you
run frequently.
You can retrieve stored jobs and apply their programming features
to a new copy job. Deleting stored jobs frees that memory
position for storing different jobs.
Storing a Job
1
Program the features and options you want to save for future use.
2
On the Job Assembly tab select Stored Jobs.
3
Select Store.
4
Select the desired icon to identify the job number.
5
Select Enter/Change Name to name the job.
6
Select the job number.
7
Enter a name up to 18 characters long for the stored job and
select Save.
8
Select Close.