Xerox WorkCentre M24-2780 - Manual (Page 231)

2–67
U S E R G U I D E (P R I N T )
RGB Color Correction Specify the coloration of the RGB Color Correction.
Normal: This setting is optimized for printing documents that
contain text and graphics, such as business documents.
Photo: This setting is optimized for printing photos or images with
gradations. Select this setting when printing images in RGB.
Web Pages: This setting is optimized for printing web pages.
Presentation: This setting is optimized for printing the color
documents vividly, such as presentation documents.
RGB Gamma Correction Specify the brightness of the documents. The higher the value, the
darker the print becomes.
Screen You can adjust the image quality. Select Gradation to print photos
and gradations clearly. Select Fineness to print the colors in
illustrations, tables, or graphs evenly.
Image Enhancement Specify whether to use the Image Enhancement function.
Selecting On, smooths out the boundaries between black and
white when printing. This reduces jagged edges, thereby
artificially increasing the resolution of the image. When printing an
image (bitmap) composed of coarse halftone dots, smooth color
gradation is impossible in certain situations. In this case, select
Off.
NOTE: The Image Enhancement feature is available only when
Print Mode is set to High Speed.
Draft Mode Specify whether to reduce the amount of toner used when printing
drafts. When you select On, the overall printed color becomes
lighter. This is best for printing documents when print quality is not
necessary.
Gray Guaranteed Select On to print grays and black within documents in black toner
only. This prevents neutral grays from exhibiting any kind of color
shading or misregistration. This feature does not apply to images
of the documents.
NOTE: For documents containing sweeps/gradients that include
gray, it may be preferable to set this feature to Off.
Stapling Select whether to staple printed documents as well as the position
of the staple.
• You can staple 2 to 50 sheets.
• You can only staple when Finisher Tray is selected for
Output Destination in the Advanced Options tab.
• You cannot use staples when Job Offset is selected.