Xerox 4590 - Manual (Page 65)

Xerox 4590/4110 Copier/Printer System Administration Guide 3-17
3. Using CentreWare Internet Services
SNMP
This section describes the settings for SNMP.
NOTE: When using the CentreWare software to manage the
machine by remote control, enable the SNMP port.
1. Start a web browser.
2. Type the IP address or the Internet address for the machine in
the address bar on the browser, and press the
Enter
key.
• Example of the IP address entry:
http://192.168.1.1/
• Example of the Internet address entry:
http://xxx.yyyy.zz.vvv/
NOTE: When specifying a port number, add ":" and a port
number to the end of the Internet address.
3. Click the
Properties
tab.
4. Click
+
on the left of
Protocol Settings
to display the items in
the folder.
5. Click
SNMP
.
6. When changing the community name, set all the
Community
Name (Read only)
,
Community Name (Read/Write)
, and
Community Name (Trap Notification)
.
NOTE: Normally, do not change the settings.