Copy control – Xerox 4590 User Manual
Page 261

Xerox 4590/4110 Copier/Printer System Administration Guide
8-103
8. Setups
Copy Control
The options here allow you to select the default settings that relate
to the copy operation, such as
Auto Paper
,
Original Type
,
Output Orientation
, and many more. To select the default
settings for the various
Copy Control
options, perform the
following steps:
1.
From the
Copy Mode Settings
screen, select
Copy Control
.
2.
Select a
Copy Control
item to be set or changed, and select
Change Settings
.
NOTE 1: Select
s
to display the previous screen and select
t
to
display the next screen.
NOTE 2: Each of the items shown in the above illustration is
discussed on the following pages.
3.
Select the desired setting for that item.
4.
Select
Save
; you are returned to the
Copy Control
screen.
5.
Repeat Steps 1-4 until you have selected the desired setting
for each
Copy Control
item.
6.
Select
Close
to return to the
Copy Mode Settings
screen.