Authentication system, Remote authentication server 1 through 5 – Xerox 4590 User Manual
Page 279

Xerox 4590/4110 Copier/Printer System Administration Guide
8-121
8. Setups
Authentication System
You can select the system for authentication from
Kebros
(Windows2000)
or
Kebros (Solaris)
.
Remote Authentication Server 1 through 5
Makes the remote authentication server settings.
Server - Server Setup
You can select the remote authentication server specification
method from
By IP Address
and
By Server name
.
Server - IP Address
You can set the IP address of the remote authentication server
using the values from 0 to 255.
NOTE: You can set a server IP address when Server - Server
Setup is set to By IP Address. 244.XXX.XXX.XXX to
255.XXX.XXX.XXX and 127.XXX.XXX.XXX cannot be set.
Server - Server Name
You can set the name of the remote authentication server. Up to
255 characters can be entered.
NOTE: You can set a server name when Remote - Server Setup
is set to By Server Name.
Server - Port Number
You can set the port number of the remote authentication server
either as 88 or within the range of 1 to 65535.
Server - Realm Name
You can set the realm name of the remote authentication server.
Up to 64 characters can be entered.
KEY POINT:
A realm name must be entered in capital letters. If
the name is entered in lower-case letters, an authentication error
occurs.