Scan defaults – Xerox 4590 User Manual
Page 290

Xerox 4590/4110 Copier/Printer System Administration Guide
8-132
8. Setups
Feature in 2nd Column
Select which features are shown in the second column of the
Basic Scanning Tab
screen. Select
2 Sided Originals
,
Scan
Resolution
, or
Reduce/Enlarge
.
Reduce/Enlarge - Button 2
Select a specific, default magnification level for the
Reduce/Enlarge button. This button is displayed when
Reduce/Enlarge
is selected in
Feature in 2nd Column
.
Reduce/Enlarge - Button 3
Select a specific, default magnification level for the
Reduce/Enlarge button. This button is displayed when
Reduce/Enlarge
is selected in
Feature in 2nd Column
.
For information about R/E Preset buttons, refer to Reduce/Enlarge
Presets on page 8-114.
Scan Defaults
In
Scan Defaults
, you select the default values for the scanner
feature. When one of the following occurs, the machine returns to
its preset scan defaults:
•
The machine power is switched on,
•
The machine returns from a power-saving mode, or
•
The
Clear All
button is pressed.
The settings selected for
Scan Defaults
are valid after switching
off and switching on the machine’s power.
1.
From the
Scan Mode Settings
screen, select
Scan Defaults
.
NOTE: If you have the optional color scanner, some of the
selections will be different as noted below.
2.
Select the item to be set or changed, and select
Change
Settings
.
NOTE: Select
s
to display the previous screen and select
t
to
display the next screen.
3.
Select the default setting for that item.