Enabling the ports and setting the ip addresses – Xerox 4590 User Manual
Page 109

Xerox 4590/4110 Copier/Printer System Administration Guide
5-17
5. Using the Scan Service
Enabling the ports and setting the IP addresses
In order to use FTP service on the machine, enable the port and
set the IP address.The procedure for setting the machine is as
follows.
NOTE: The configuration can also be performed using
CentreWare Internet Services.
Refer to “Using CentreWare Internet Services” on page 3-1.
1.
Display the
System Administrator Menu
screen.
a. Press the
Log In/Out
button.
b. Enter the UserID using the numeric keypad and then
select
Confirm
.
NOTE: The default User ID value is 11111. When using the
Authentication feature, a password is required. The default
password is x-admin.
c. Select
System Settings
.
2.
Enable the SNMP port.
a. Select
System Settings
.
b. Select
Network Settings
.
c. Select
Port Settings
.
d. Select
SNMP
and then select
Change Settings
.
e. Select
SNMP - Port
and select
Change Settings
.
f. Select
Enable
and then select
Save
.
g. Select
Close
.
3.
Enable the FTP client port and Internet service (HTTP) port as
above.
4.
Select
Close
.