Xerox 4590 User Manual
Page 60
Xerox 4590/4110 Copier/Printer System Administration Guide
3-12
3. Using CentreWare Internet Services
9.
Set the
Poling Interval
.
10.
Set the
Number of Searches
.
11.
Set the
Password
.
a. Enter the
Password
.
b. Re-enter the same password in the
Re-enter Password
field.
12.
Select the
Enable
check box to enable the
TBCP Filter
.
NOTE: The TBCP Filter checkbox will have a checkmark in it
indicating that the TBCP Filter is enabled.
13.
Set the
Tree Name
.
14.
Set the
Context Name
.
NOTE: Set this item only when the operation mode is in
Directory Service.
15.
Select a frame type from the
Transport Protocol - Frame
Type
pull-down menu.
NOTE: Set this item only when the operation mode is in
Directory Service.
16.
Select the
Enable
check box to enable
SLP - Active
Discovery
.
17.
Reflect the values as the machine's setting values.
a. Click the
Apply New Settings
. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name
and
Password
, and then click
OK
.
NOTE: The default User ID value is 11111 and password is
x-admin.
c. The right frame on the web browser will change to the
machine reboot display.
d. Click
Reboot
. The machine will reboot and the setting
value will be reflected.