Initialize hard disk – Xerox 4590 User Manual
Page 218

Xerox 4590/4110 Copier/Printer System Administration Guide
8-60
8. Setups
3.
Follow the instructions provided on the screen for carrying out
a specific function.
Step-by-step instructions are provided for the
Initialize Hard
Disk
procedure; refer to Initialize Hard Disk on page 8-60.
4.
Select
Close
to return to the
Maintenance
screen.
5.
Select
Close
to return to the
Common Settings
screen.
Initialize Hard Disk
This procedure initializes the hard disk. The data erased by
formatting includes additional fonts, ESC/P, HP-GL/2, and SMB
folder.
KEY POINT:
The secure print document log is not erased.
1.
From the
Maintenance
screen, select
Initialize Hard Disk
.
2.
Select the partition to be reformatted and select
Start
.
3.
Select
Yes
.
4.
When reformatting completes successfully, the message
screen appears, select
Confirm
.
5.
Select
Close
to return to the
Maintenance
screen.
6.
Select
Close
to return to the
Common Settings
screen.