Xerox 4590 - Manual (Page 304)

Xerox 4590/4110 Copier/Printer System Administration Guide 8-146
8. Setups
•
Secondary Server Name:
Select the server name for the
secondary server. A maximum of 64 characters may be
used.
NOTE: Use this feature when the Secondary Server
Setup setting is By Server Name.
4. Select
Save
; you are returned to the
Secondary Server
screen.
5. Repeat Steps 1-4 for the remaining items.
6. From the
Secondary Server
screen, select
Close
to return to
the
Address Search (Directory Service)
screen.
Secondary Server Port
Number
Select the directory server (secondary server) port number in the
range of 1-65535.
Login Name
Select the login name for accessing to the directory server. A
maximum of 256 characters may be used.
KEY POINT:
Set this only when authentication is required for the
directory service. Do not select a setting the
Login Name
when
authentication is not required.
Password
Select a password for accessing to the directory server. A
maximum of 32 characters may be used.
KEY POINT:
Set this only when authentication is required for the
directory service. Do not select a setting the
Login Name
when
authentication is not required.
Search Root Entry DN
Enter the search root character string; a maximum of 256
characters may be used.
Scope of Search from Root
Entry
Select the default search range from the search root.
•
Root entry only:
Searches the root level only.
•
One level below root entry only:
Searches from the root
and one level below the root.
•
All levels below root entry:
Searches from the root including
all levels below root.
Object Class of Search
Target
Enter the search target object classes; a maximum of 32
characters may be used.
Server Application
Select the software used for the directory server; select one of the
following:
Microsoft Active Directory
,
Novell NetWare 5.*
, or
Other Applications
.
Attribute Type of Recipient
Name
Select the recipient name attribute type. A maximum of 32
characters may be entered.