Port settings, Protocol settings – Xerox 4590 User Manual
Page 276

Xerox 4590/4110 Copier/Printer System Administration Guide
8-118
8. Setups
Port Settings
Select the interface by which the machine is connected to the
client. In
Port Settings
, you can set the following items:
For information about port settings, refer to the following sections
in this guide:
•
Services and features on page 1-5
•
Network setting items for CentreWare Internet Services on
page 3-5
•
Protocol Settings
Select the parameters that are required for communications
between the machine and client workstations. In
Protocol
Settings
, you can set the following items:
For information about port settings, refer to the following sections
in this guide:
•
TCP/IP (LPD/Port 9100) on page 2-1
•
•
1. LPD
9. FTP Client
2. NetWare
10. Receive E-mail
3. SMB
11. Send E-mail
4. IPP
12. Mail Notice Service
5. EtherTalk
13. UPnP Discovery
6. Salutation
14. Internet Services
7 Port9100
15.SOAP
8. SNMP
1. Ethernet Settings
4. TCP/IP - Subnet Mask
2. TCP/IP - Get IP Address
5. TCP/IP - Gateway Address
3. TCP/IP - IP Address
6. TCP/IP - IP Filter