Xerox 4590 User Manual
Page 268
Xerox 4590/4110 Copier/Printer System Administration Guide
8-110
8. Setups
Date Position- Bottom Left
When selecting
Bottom Left
under
Annotation - Date - Position
in the
Output Format
screen for printing, you can finely tune the
date position.
Set the position in the horizontal direction within the range
0-100
and in the vertical position within the range
0-100
in 1 mm
increments.
Date Position-Bottom
Center
When selecting
Bottom Center
under
Annotation - Date -
Position
in the
Output Format
screen for printing, you can finely
tune the date position.
Set the position in the horizontal direction within the range
0-100
and in the vertical position within the range
0-200
in 1 mm
increments.
Date Position-Bottom Right
When selecting
Bottom Right
under
Annotation - Date -
Position
in the
Output Format
screen for printing, you can finely
tune the date position.
Set the position in the horizontal direction within the range
0-100
and in the vertical position within the range
0-100
in 1 mm
increments.
Page No. Position defaults
You can select the default position that the page number is printed
on the output when the
Page No. - Position
feature is selected on
the
Annotation
screen (
Output Format
tab). There are six page
number position defaults:
•
Page No. Position - Top Left
•
Page No. Position - Top Center
•
Page No. Position - Top Right
•
Page No. Position - Bottom Left
•
Page No. Position - Bottom Center
•
Page No. Position - Bottom Right
Page No. Position-Top Left
When selecting
Top Left
under
Annotation - Page Number -
Position
in the
Output Format
screen for printing, you can finely
tune the page number position.
Set the position in the horizontal direction within the range
0-100
and in the vertical position within the range
0-100
in 1 mm
increments.
Page No. Position-Top
Center
When selecting
Top Center
under
Annotation - Page Number -
Position
in the
Output Format
screen for printing, you can finely
tune the page number position.
Set the position in the horizontal direction within the range
0-100
and in the vertical position within the range
0-200
in 1 mm
increments.