Xerox 4590 - Manual (Page 183)

Xerox 4590/4110 Copier/Printer System Administration Guide 8-25
8. Setups
Auto Power Saver
In power saving mode, there is a "low-power mode" and a "sleep
mode," and when the set time has elapsed, these modes are
switched to in the following way, thus reducing the power
consumption.
Last operation on the machine
J Low-power mode J Sleep mode
1. From the
Machine Clock/Timers
screen, select
Auto Power
Saver
, and select
Change Settings
.
2. Set low-power mode and sleep mode.
• From Last Selection to Low Power Mode:
Set the time
to go from last operation to low-power mode. Set the time
from 1 to 240 minutes, in 1 minute increments.
NOTE: Set the time From Last Operation to Low-power
Mode not to exceed the time From Last Operation to Sleep
Mode.
•
From Last Selection to Sleep mode:
Set the time to go
from last operation to sleep mode from 1 to 240 minutes, in
1 minute increments.