Konica Minolta bizhub 420 - Manual (Page 75)

3 Transmission
3-24 bizhub 500/420
Tr
an
sm
iss
ion
Chapter 3
– In case of the dial (pulse) line, you can switch it to the push-button
tone using the asterisk
key.
– Pause
Press [Pause] to insert a space in a dialed number. Pressing [Pause]
once creates an interval of one second between numbers. Multiple
spaces can also be entered. A “P” is displayed on the screen.
– When the PBX connection is [ON] and a call is made from the inter-
nal line to the outside line, press [Pause] after the outside line
number such as “0” so that dialing is made more surely. “P” is dis-
played on the screen.
– -
This is entered as a separation symbol when dialing. It has no effect
on dialing. A “-” is displayed on the screen.
– Abbr. Dial
Enter the Abbreviated dialing number (up to 2,000 from 0001 to
2000) through the keypad and specify the destination registered in
the Address Book.
On the screen, A abbr. number: Destination name is displayed as
seen in the example “A0001: KMBT”.
– Scan to E-Mail
An E-Mail attached with an image is sent.
– When the destination is an E-Mail address, the Subject of the E-
Mail, the Text, the File Name of image, and the From of the sender
can be set manually. For details, see “Setting Transmission Condi-
tions” on page 3-10.
– Recently Dialed #
A fax transmission is made to the destination to which transmission
was made previously.
– For details of Recently Dial #, see “Manual Redialing” on page 3-27
– Save in User Box
An image is saved in the optional hard disk.
3
Press [Start].
Transmission begins.