Konica Minolta bizhub 420 - Manual (Page 223)

10 Registering/Settings
10-44 bizhub 500/420
Re
gist
erin
g/
Set
ti
ngs
Chapter 10
10.7 Setting the Bulletin Board
The bulletin board polling transmission / reception which used the F code
can be used in this machine. In order to perform the bulletin board, it is nec-
essary to set up the Bulletin Board User Box.
!
Detail
For the registration method of the Bulletin Board User Boxes, see “User’s
Guide (Box Operations).”
User Box No.
Either is specified among 1-999999999.
Box Name
The Box Name can be up to 20 characters.
Password (Access Password)
Enter the alphanumeric up to 8 digits.
!
Detail
Documents registered in the box can be printed using the password
which was set at the time of registration of the Bulletin Board User Boxes.
Scheme of transmission/reception by polling with bulletin board
!
Detail
The information defined should be given to the station (FAX) that will re-
ceive information by polling in the bulletin board.
For the operations of the bulletin board, see page 9-8.
Originating station
Sends information by polling from a bul-
letin board. Receiving station
Receives the document by polling by
specifying the bulletin board.
The document that is to be transmitted by
polling should be held in the bulletin board. The Box No. should be specified to receiv-
ing by polling.
Registering a bulletin board.