4 fax active screen, Fax active screen, Fax active screen -14 – Konica Minolta bizhub 420 User Manual
Page 239
11
Utility Mode
11-14
bizhub 500/420
Utility Mode
Ch
ap
te
r 11
11.4
Fax Active Screen
Set the message in transmission if it is displayed on the screen or not.
*
indicates factory default setting.
Fax Active Screen
1
Open the User Setting screen (See “Entering User Setting” on
page 11-2).
2
Press [Display Setting].
–
Some items may not be displayed depending on the optional set-
tings.
–
In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Display
Setting], enter 2 through the numeric keypad.
3
Press [Fax Active Screen].
Item
Description
Available value
TX Display
Set the message in [Transmission] if it is
displayed on the screen or not.
ON / OFF
*
RX Display
Set the message in [Receive] if it is dis-
played on the screen or not.
ON / OFF
*