Konica Minolta bizhub 420 - Manual (Page 274)

Utility Mode 11
bizhub 500/420 11-49
Utility Mode
Ch
ap
te
r 11
9
Use numeric keypad, [+], [SPACE], or to input FAX ID in
[Sender (TSI)] box.
– + Inputs +.
– Space Inputs a space.
– Moves the cursor to left.
– Moves the cursor to right.
– Delete Characters on the position of the cursor are deleted one
by one.
When the cursor is at the right end, the character are de-
leted from the rear end.
– During transmission, [+] and [SPACE] are ignored.
10
Press [User Box Number] and enter the number of the box into which
a document received is stored.
– You can enter the box No. in the range of 1 to 999999999.
11
Press [OK] and then press [Close].
12
Press [OK].
The TSI RX User Box is set.
13
Press [Exit].
The Fax RX distribution screen will be restored.