Konica Minolta bizhub 420 - Manual (Page 235)

11 Utility Mode
11-10 bizhub 500/420
Utility Mode
Ch
ap
te
r 11
11.2.10Administrator Setting >> Fax Setting >> PBX CN Set
Sets the connection method of the PBX line. (page 11-50)
11.2.11Administrator Setting >> Fax Setting >> Report Settings
Sets the method to print a report. (page 11-52)
*
indicates factory default setting.
Item Description Available value
PBX CN Set Select ON when your FK-502 is connected
to PBX line.
When PBX connection mode is set at ON,
this parameter determines the outside line
access code. The external line access code
is the prefix attached to the telephone
number when dialing to an external line.
This prefix will be dialed when external line
option is selected with abbreviated dial
number or Program. ON / OFF
*
When set to ON, the
number is of the outside
line.
Item Description Available value
Activity Report Determines whether to print the report and
the timing at which the report will be printed
out. OFF / Daily / Every 100
Comm.
*
/ 100/Daily
TX Report ON / If TX Fails
*
/ OFF
Sequential TX
Report ON
*
/ OFF
Timer Reserva-
tion TX Report ON
*
/ OFF
Confidential RX
Report ON
*
/ OFF
Bulletin TX Re-
port ON
*
/ OFF
TX Result Re-
port Check Determines whether to display the trans-
mission result report select screen. If you
select “ON”, it will be displayed after each
transmission. OFF
*
/ ON