Konica Minolta bizhub 420 - Manual (Page 336)

Appendix 13
bizhub 500/420 13-7
Appe
nd
ix
Ch
apt
e
r 13
D Dialing method There are two methods: PB or Pulse.
E ECM (Error
Correction
Mode)
The error correction mode for G3 communi-
cation. It communicates with a destination
during checking whether data is sent to the
destination properly or not. If not, it sends the
data again. If the destination supports the
ECM, data is transmitted in ECM unless you
set the ECM OFF mode.
F Factory default
setting
The value set at the factory. You can change
some defaults by the Utility Mode . It is useful to
set the value that you use frequently as the
default.
FAX ID The ID code to recognize each other at the
fax communication. The telephone number is
usually registered as the FAX ID.
F-code It defines the use of the sub-address of T.30*
standardized by ITU-T. You can use various
functions of the F-code in the fax communi-
cation among facsimiles supporting the F-
code function even if their manufactures are
different. In this machine, the F-code is used
in the bulletin board, relay request, confiden-
tial communication and ID transmission. (*
This is one of the communication standards.)
Frame Erase The function to erase dark bands reproduced
when the original is a book or read with the
ADF left open.
G G3 One of the fax communication modes stand-
ardized by ITU-T. There are G3 and G4 in the
communication mode. G3 is the most used
communication mode now.
Group To group multiple abbreviated numbers. It is
useful if you frequently use the sequential
multiple station transmission or the polling
reception. You can register up to 500 abbre-
viated numbers in a group.
H Horizontal
scanning
The horizontal direction when the original is
scanned.
L LDAP Abbreviation of Lightweight Directory Access
Protocol. A protocol to access mail address-
es of users using a network or database to
control information on the environment,
through the Internet, Intranet, or other TCP/IP
networks.
Long original The function to transmit pages longer than
the length (420 mm/16.5 inch) of 11 × 17 size.
If you attempt to send such a long document
without selecting Long original mode, paper
misfeed will occur. When Long original mode
is selected, pages of up to 800 mm can be
transmitted.
Terms Description