Konica Minolta bizhub 420 - Manual (Page 55)

3 Transmission
3-4 bizhub 500/420
Tr
an
sm
iss
ion
Chapter 3
5
Place the original on the machine.
– For details, see “Placing the Orig-
inal on the Machine” on page 3-5.
6
Press [Start].
– The machine begins to scan the original and transmission starts.
– The following screen will appear if the TX Result Report Check
screen is programmed to appear. If you want to print the TX Report,
press [Yes].
– To interrupt transmission, press [STOP].
– When it can not transmit, see page 5-2.
– If the transmission fails, TX Report is automatically output (if the TX
Report is programmed to print). For details of Report Settings, see
“Report Settings” on page 11-52.
– For more information about the TX Report, see “TX Report” on
page 12-7.