Konica Minolta bizhub 420 - Manual (Page 243)

11 Utility Mode
11-18 bizhub 500/420
Utility Mode
Ch
ap
te
r 11
11.6 Entering Power Save Mode (Fax)
Set the Entering Power Save Mode (Fax).
*
indicates factory default setting.
Entering Power Save Mode (Fax)
1
Open the Administrator Setting screen (See “Entering Administrator
Setting” on page 11-3).
2
Press [System Setting].
– Some items may not be displayed depending on the optional set-
tings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [System
Setting], enter 1 through the numeric keypad.
3
Press [Power Save Setting].
Item Description Available value
Entering Power
Save Mode
(Fax) If the [Immediately] have been selected and
it is power save mode when input signals
come, then power save mode will be re-
sumed after completion of reception. Normal
*
/ Immediately