3 tx report, 1 manual printout, 2 automatic printout – Konica Minolta bizhub 420 User Manual
Page 288: Tx report -7, Manual printout -7, Automatic printout -7, Tx report
Explanation of Reports and Lists
12
bizhub 500/420
12-7
Explan
at
ion
o
f Rep
o
rt
s and
L
ist
s
Ch
ap
te
r 12
12.3
TX Report
12.3.1 Manual Printout
The TX Result Report Check screen appears at the transmission if [ON] is se-
lected at [Report Settings]-[TX Report] by the Utility Mode.
Press [YES] to print the TX result report. Press [NO] to not print the report.
For details, see “Report Settings” on page 11-53.
12.3.2 Automatic Printout
Automatic printout can be set to [ON], [If TX Fails] or [OFF] with [TX Report]
at [Report Settings] of Utility Mode. For details, see “Report Settings” on
page 11-53.
*
The actual reports may be different from the reports in this manual.
No.:
Serial numbers are assigned to each transmission and reception.
Destination:
The following is shown.
• Name when name is registered in abbreviated dialing or entry list
• Destination telephone number
Start Time:
The time at which communication started is shown.