Konica Minolta bizhub 420 - Manual (Page 148)

Transmission Applications 7
bizhub 500/420 7-27
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
– To correct a wrong entry, use [Del.].
– Press [C] (clear) to clear the whole entry.
– To release the setting, press [OFF].
5
Press [OK].
The Comm. Setting screen will be restored.
6
Press [OK].
– To release the setting, press [OFF] or [Cancel].
The FAX screen will be restored.
7
Set other functions if necessary.
– See “Setting Transmission Conditions” on page 3-10 for informa-
tion about setting functions in the FAX screen. See “Application
Functions Overview” on page 7-4 for information about setting
functions in the Fax application menu.
8
Designate the destination.
– See “Selecting One Destination” on page 3-19 for information
about designating the destination.
9
Set the original document.
– See “Placing Originals on the Platen Glass” on page 3-6 for infor-
mation about setting the document.
10
Press [Start].
The FK-502 stores the document in memory before starting transmis-
sion.
!
Detail
To cancel transmission, see “Canceling Transmission” on page 3-32.
If the destination is not ready to receive, your call will be redialed. For in-
formation about redialing, see “Manual Redialing” on page 3-27.
If transmission fails, refer to “Cannot Send Messages” on page 5-2.