Konica Minolta bizhub 420 User Manual
Page 190
Registering/Settings
10
bizhub 500/420
10-11
Re
gist
erin
g/
Set
ti
ngs
Chapter 10
5
Press [Name] and then enter the name of Address Book.
–
For the operation of the entering character, see page 13-3.
–
The name can be up to 24 characters.
–
In [No.], an unused number is displayed.
6
Press [User Box Name].
7
Select the Box to be registered in the screen displayed and press [OK].
–
Before conducting this operation, the Box is required to be regis-
tered in advance.
–
For the registration method of the Box, see “User’s Guide (Box Op-
erations).”
–
If you log in as a user set up by the user authentication, the [Per-
sonal User Box] tab is displayed.
8
To change the Search Character, press [Index] and then re-register the
Search Character.
–
Press the Search key of the Search Character you want to register
from among [Main] - [etc].
–
For a destination to which a message is sent frequently, specify the
Search Character and select [Main] at the same time. This allows
you to display it at the first place in the selection of the Address
Book.
–
A character at the head of the Name is automatically set as the
Search Character.