Konica Minolta bizhub 420 - Manual (Page 277)

11 Utility Mode
11-52 bizhub 500/420
Utility Mode
Ch
ap
te
r 11
11.13 Report Settings
You may select the Report Settings to be On or Off. This settings prints the
reports of communication management, communication result and reserva-
tion, and the input/output trays for the reports. If ON is selected, the manner
of printing may also be selected.
*
indicates factory default setting.
*1
Tray type may be different depending on the installed option.
*2
Tray1 is default, when the option is not installed.
!
Detail
Select ON in “TX Result Report Check” the TX Report will be printed if
YES is selected. The report will not be printed if NO is selected.
Item Description Available value
Activity Report Determines whether to print the report and
the timing at which the report will be printed
out. OFF / Daily / Every 100
Comm.
*
/ 100/Daily
TX Report ON / If TX Fails
*
/ OFF
Sequential TX
Report ON
*
/ OFF
Timer Reserva-
tion TX Report ON
*
/ OFF
Confidential RX
Report ON
*
/ OFF
Bulletin TX Re-
port ON
*
/ OFF
TX Result Re-
port Check Determines whether to display the trans-
mission result report select screen. If you
select “ON”, it will be displayed after each
transmission. OFF
*
/ ON