Konica Minolta bizhub 420 - Manual (Page 250)

Utility Mode 11
bizhub 500/420 11-25
Utility Mode
Ch
ap
te
r 11
11.9 Telephone Line Settings
These are the options on line parameters that you can make a choice.
*1
The displays are different depending on the country.
*2
The setting value is different depending on the country.
*
indicates factory default setting.
Item Description Available value
Dialing Method
*1
Set the method of dialing. PB
*
/ 10pps
Receive Mode Set to [Auto RX] for automatic reception.
And set to [Manual RX] when a lot of tele-
phone calls are made with an external tele-
phone connected or when the remote
reception function is employed. Auto RX
*
/ Manual RX
Number of RX
Call Rings Set the number of receptions.
Set the number of the pseud-ringback
tones from the arrival of a message to the
start of reception. 0-15 (2 times
*
)
Number of Re-
dials
*2
Set the number of redials when no re-
sponse is available due to the other party
being busy. 0-7 (3 times
*
)
Redial Interval Set the intervals between the redials. 1-15 (3 min.
*
)
Line Monitor
Sound Set to ON when you want to hear the sound
on the line through the speaker while in
transmission. ON / OFF
*
Line Monitor
Sound Volume Set the sound volume of the speaker. 0-31 (16 * )