Konica Minolta bizhub 420 - Manual (Page 247)

11 Utility Mode
11-22 bizhub 500/420
Utility Mode
Ch
ap
te
r 11
11.8 Header/Footer Position
You may select this printing feature to be ON or OFF. This feature identifies
the originating station and the time of reception. If you select ON, you may
also choose to print this information.
*
indicates factory default setting.
*1
The displays are different depending on the country.
!
Detail
The information identifying the originating station, which can be printed
on the reproduced pages at the receiving station, is both of the FAX ID
and the name. For details, see “Sender Information” on page 3-42.
Item Description Available value
Header Posi-
tion
*1
Set a position in which the sender
information is printed. Inside Body Text:
The sender information
will be printed inside the
area corresponding to the
document.
Outside Body Text*:
The sender information
will be printed outside the
area corresponding to the
document.
OFF: The sender information
will not be printed.
Footer Position Set the reception time and the re-
ception number if they are printed or
not on the document received. Inside Body Text:
The time/number infor-
mation will be printed in-
side the area
corresponding to the
document.
Outside Body Text:
The time/number infor-
mation will be printed at
the bottom of the repro-
duced pages.
OFF
*
: The time/number infor-
mation will not be printed.