Konica Minolta bizhub 420 - Manual (Page 254)

Utility Mode 11
bizhub 500/420 11-29
Utility Mode
Ch
ap
te
r 11
TX/RX Setting
1
Open the Administrator Setting screen (See “Entering Administrator
Setting” on page 11-3).
2
Press [Fax Setting].
– Some items may not be displayed depending on the optional set-
tings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax Set-
ting], enter 8 through the numeric keypad.
3
Press [TX/RX Setting].