Konica Minolta BIZHUB C652DS - Manual (Page 238)

bizhub C652/C652DS/C552/C552DS/C452 10-3
10.1 Using an authentication unit (biometric type) 10
To use the authentication unit, first register the finger vein pattern of the user in this machine. The registered
user, who is authenticated with the finger vein pattern, can log in to this machine or execute a print job. This
section explains how to configure the required settings in this machine, register users, and log in with
authentication.
10.1.1 Configuring this machine
NOTICE
User authentication settings must be configured with MFP authentication on this machine.
This device does not support external server authentication. To combine account track settings with user
authentication settings, set Synchronize User Authentication & Account Track to "Synchronize".
1
Use the control panel of this machine to display the Administrator Settings screen. Press [4 User
Authentication/Account Track], then [1 General Settings].
2
Set [User Authentication] to "ON (MFP)", and then press [OK].
3
Press [Yes], and then [OK].
4
Press [8 Authentication Device Settings].
5
Press [1 General Settings].
6
Press [Bio Authentication].