beautypg.com

Konica Minolta BIZHUB C652DS User Manual

Page 139

background image

bizhub C652/C652DS/C552/C552DS/C452

6-9

6.3

Copier Settings

6

Half-Fold/Tri-Fold Specifi-
cation

Specify whether to apply Half-Fold/Tri-Fold for all pages together or for
specific pages when handling a job containing multiple pages.
When Booklet is selected simultaneously with Half-Fold, all pages are half-
folded together even if [One Sheet at a Time] is selected.
If the number of original pages exceeds the folding capacity of this ma-
chine, the "Fold" function setting is cancelled automatically, and the sheets
are printed without being folded.
This item is displayed if the Saddle Stitcher SD-508 is installed in the Fin-
isher FS-526.
To change the folding capacity, contact your service representative.
Half-folding capacity setting: 1-3 (default:3)
Tri-folding capacity setting: 1-3 (default:1)

Half-Fold Specification

Specify whether to apply Half-Fold together for all pages or for each page
when handling a job containing multiple pages.
When Booklet is selected simultaneously with Half-Fold, all pages are half-
folded together even if [One Sheet at a Time] is selected.
If the number of original pages exceeds the folding capacity of this ma-
chine, the "Fold" function setting is cancelled automatically, and the sheets
are printed without being folded.
This item is displayed if the Saddle Stitcher SD-509 is installed in the Fin-
isher FS-527.
To change the folding capacity, contact your service representative.
Half-folding capacity setting: 1-3 (default:3)

Print Jobs During Copy
Operation

Appears when user access is permitted under Administrator settings. For
details, refer to page 7-43.

Automatic Image Rotation

Finishing Program

Configure whether to display the Finishing Program button in the basic set-
tings screen. To display the button, register the contents of the finishing
program.
Register frequently used finishing functions so that you can set them at
once by using the button that appears in the basic settings screen.
This item is set if the finisher is installed.

Card Shot Settings

Appears when user access is permitted under Administrator settings. For
details, refer to page 7-43.

Factory default

Auto Booklet ON when
Fold & Staple

Auto Select Booklet

Auto Zoom for Com-
bine/Booklet

Auto Display Zoom Ratio

Auto Sort/Group Selection

Yes

Default Copy Settings

Factory Default

When AMS Direction is In-
correct

Print

Separate Scan Output
Method

Page Print

Enlargement Rotation

Allow

Auto Zoom (Platen)

OFF

Auto Zoom (ADF)

ON

Specify Default Tray when
APS Off

Tray Before APS ON

Select Tray for Insert Sheet

Tray 2

Tri-Fold Print Side

Inside

Half-Fold/Tri-Fold Specifi-
cation

Multiple Sheets

Half-Fold Specification

Multiple Sheets

Settings

This manual is related to the following products: