10 security settings, 1 administrator password, 2 user box administrator setting – Konica Minolta BIZHUB C652DS User Manual
Page 197: Security settings -49, Administrator password -49, User box administrator setting -49
bizhub C652/C652DS/C552/C552DS/C452
7-49
7.10
Security Settings
7
7.10
Security Settings
Configure the settings for the restricting the functions of this machine for processing secret data.
7.10.1
Administrator Password
Change the administrator password.
0
The administrator password can be entered using 0 through 8 digits.
0
If password rules are specified, an 8-digit password must be entered.
0
If you enter an incorrect administrator password a configured number of times, you are prohibited from
using this machine. In this case, contact your service representative.
1
Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Administrator
Password].
2
Enter the administrator password, and then press [OK].
3
Enter a new administrator password.
4
Press [Password Confirmation], enter the administrator password again, and then press [OK].
5
Press [OK].
The password is changed.
d
Reference
To configure password rule settings:
Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö
[Password Rules].
7.10.2
User Box Administrator Setting
Configure settings for the User Box operations. For details, refer to the "User's Guide [Box Operations]".
Factory default
Administrator Password
12345678