Konica Minolta BIZHUB C652DS - Manual (Page 175)

bizhub C652/C652DS/C552/C552DS/C452 7-27
7.1 System Settings 7
7.1.15 Default Bypass Paper Type Setting
Configure the initial settings for the paper type to be used for the bypass tray. The initial setting for the paper
type is applied after the job finishes or the tray runs out of paper.
%
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Default Bypass
Paper Type Setting].
7.1.16 Advanced Preview Setting
Configure settings to fax or scan a document. For details, refer to the "User's Guide [Network
Scan/Fax/Network Fax Operations]".
Settings
Configure whether to specify the initial setting for paper type for the bypass tray. When you specified this,
select a paper type.
Factory default
Default Bypass Paper Type
Setting Yes
Paper Type: Plain Paper