7 erase, Frame erase, Erase -41 frame erase -41 – Konica Minolta BIZHUB C652DS User Manual
Page 107: P. 5-41
bizhub C652/C652DS/C552/C552DS/C452
5-41
5.4
Application
5
d
Reference
To set to an appropriate zoom:
Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Auto Zoom for Combine/Booklet].
5.4.7
Erase
Frame Erase
Copies can be produced by erasing shadows of punched holes, unnecessary areas around the original text,
such as the transmission information on received faxes and the shadows of punched holes. All four sides
around the original can be erased in the same width or in a different width for each side.
%
Press [Application] ö [Erase] ö [Frame Erase].
Settings
Frame
Erases the four sides of the original in the same width.
Top Right Bottom Left
Erases each frame side in a different width.
+/-
•
North American model (inch): Press [+], [-] to set the erasing width be-
tween 1/16 inch and 2 inch.
•
European model (cm): Press [+], [-] to set the erasing width between 0.1
mm and 50.0 mm. The erasing width can also be entered using the key-
pad.
None
Sets the erasing width to 0 inch (0 mm).
A
A:1/16 inch to 2 inch (0.1 mm to 50.0 mm)
A