beautypg.com

9 system connection, System connection -47 – Konica Minolta BIZHUB C652DS User Manual

Page 195

background image

bizhub C652/C652DS/C552/C552DS/C452

7-47

7.9

System Connection

7

7.9

System Connection

Configure settings for software, cellular phone, or PDA that can be accessed with this machine.

%

[Utility/Counter] ö [Administrator Settings] ö [System Connection]

Settings

OpenAPI Settings

Access Setting

Specify whether to allow the user to access this
machine from other system that is using OpenAPI.

SSL/Port Settings

SSL Setting

To use SSL encryption,
select [SSL Only] or
[SSL/Non-SSL].

If Enhanced Securi-
ty Mode is enabled,
[SSL Only] is ena-
bled.

Port No.

Enter a port number.

Port No. (SSL)

Enter the port number
to be used for SSL
communication.

Client Certificate Re-
quest

Specify whether to ena-
ble a client certificate
request. If you authenti-
cate the client by re-
questing for its
certificate (verification
of client certificate), se-
lect [Enable].

Certificate Verification
Level Settings

To verify a certificate,
configure settings to
verify the certificate.
[Validity Period]:
Select whether to
check that the target
certificate is within the
validity period.
[Key Usage]:
Select whether to
check that the certifi-
cate key is being used
properly.[Chain]: Se-
lect whether to check
that the certificate
chain (certification
path) is correct.
[Expiration Date Confir-
mation]:
Select whether to
check the target certifi-
cate for validation.
[CN]:
Select whether to
check that the CN of
the certificate matches
the server address.

Authentication

Specify whether to authenticate an access from
other system that is using OpenAPI.

To authenticate, enter the login name and
password in [Login Name] and [Password]

When user authentication is performed or when
acquiring the device information with the Page-
Scope Authentication Manager, set the Au-
thentication setting of the OpenAPI Setting
screen of the machine to [OFF].

Automatic Prefix/Suffix
Setting

Select whether to automatically add prefix and suffix to a destination number.
If [Automatic Prefix/Suffix Setting] is set to [ON], the other settings will be re-
stricted. For details, refer to the "User's Guide [Network Administrator]".

This manual is related to the following products: