Konica Minolta BIZHUB C652DS - Manual (Page 138)

bizhub C652/C652DS/C552/C552DS/C452 6-8
6.3 Copier Settings 6
6.3 Copier Settings
Configure the settings used by the copy functions.
%
Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings].
Settings
Auto Booklet ON when
Fold & Staple Configure whether to automatically specify Booklet when Center Staple
and Fold is selected.
This item is displayed if the saddle stitcher is installed in the finisher.
Auto Zoom for Com-
bine/Booklet Configure whether the preset zoom ratios are automatically selected when
Combine or Booklet is selected in Auto Paper mode.
•
Select the recommended zoom ratios for the following zoom settings:
2 in 1, Booklet: 64.7% (70.7%)
4 in 1: 50.0%
8 in 1: 32.3% (35.3%)
Auto Sort/Group Selection Configure whether to output the copied pages automatically in Sort mode
when copying multiple-page original using the ADF.
Default Copy Settings Configure the initial values for the Copy function to be displayed when the
power in turned on or the [Reset] key is pressed.
Current Setting The current settings are used as the default set-
tings.
Factory Default The factory settings are used as the default set-
tings.
Default Enlarge Display
Settings This setting is for the enlarged display screen operations. For details, refer
to the "User's Guide [Enlarge Display Operations]".
When AMS Direction is In-
correct Configure whether to print or discard the job when the original orientation
does not match that of paper in Auto Zoom mode.
Separate Scan Output
Method Configure the output for divided original loaded in the ADF or for multiple
pages of the original scanned on the original glass.
Page Print Printing of copies that can be printed begins while
the original is being scanned.
Batch Print Printing begins after all pages of the original have
been scanned.
Enlargement Rotation Configure whether to rotate and print a large-size original image when the
original orientation does not match that of paper.
Auto Zoom (Platen) Appears when user access is permitted under Administrator settings. For
details, refer to page 7-43.
Auto Zoom (ADF)
Specify Default Tray when
APS Off
Select Tray for Insert Sheet
Tri-Fold Print Side This item is displayed when user access is allowed in Administrator set-
tings while the Finisher FS-526 is installed. For details, refer to page 7-43.