Konica Minolta BIZHUB C652DS User Manual
Page 134
bizhub C652/C652DS/C552/C552DS/C452
6-4
6.1
System Settings
6
Auto Paper Select for Small
Original
Specify the paper size to be used for a case where the document placed
on the original glass is too small to be detected in Auto Paper mode.
Copy on Small Size
Prints on 5-1/2 e 8-1/2 (A5) paper.
•
If 5-1/2 e 8-1/2 (A5) paper is not loaded in the
tray, a message that instructs you to load 5-
1/2 e 8-1/2 (A5) paper in the bypass tray ap-
pears.
Copy on Letter (Copy
on A4)
Prints on 8-1/2 e 11 (A4) paper.
Prohibit Copy
Starts printing when a paper tray is selected man-
ually and the [Start] key is pressed.
Blank Page Print Settings
Appears when user access is permitted under Administrator settings. For
details, refer to page 7-26.
Page Number Print Posi-
tion
Specify a page number print position when printing page numbers after
configuring 2-sided print or booklet settings. Select whether to print the
page numbers on a same position on all pages or on positions symmetric
with respect to the stapling position.
Select Keyboard
Select the keyboard type displayed by default in the touch panel.
Factory default
Language Selection
English
Measurement Unit Settings
This value varies depending on the area.
Auto Tray Selection Set-
tings
Tray Priority
Tray 1 ö Tray 2 ö Tray 3 ö Tray 4 ö LCT
LCT is displayed when the optional LCT is installed.
Auto Tray Switch ON/OFF
Restrict
No Matching Paper in Tray
Setting
Stop Printing (Tray Fixed)
Print Lists
•
Tray 1
•
1-Sided
Post Inserter Settings
Paper Tray: F1
Paper Type: Plain Paper
Paper size: Auto Detect
Paper Type
Plain paper
Paper Size
Auto Detect
Auto Color Level Adjust.
Standard (3)
Low Power Mode Settings
15 min.
Sleep Mode Settings
30 min.
Print/Fax Output Settings
Print: Page Print
Fax: Batch Print
Output Tray Settings
•
Copy: Tray 2
•
Print: Tray 2
•
Print Reports: Tray 1
•
Fax: Tray 1
[Output Tray] is displayed when the Finisher FS-526, Finisher FS-527, or
Job Separator JS-504 is installed.
[Tray 3] is displayed if the Job Separator JS-603 is installed in the Finisher
FS-527.
AE Level Adjustment
Standard (2)
Auto Paper Select for Small
Original
Prohibit Copy
Blank Page Print Settings
Do Not Print
Page Number Print Posi-
tion
Left & Right Bind: All the Same
Top & Bottom Bind: All the Same
Settings