Konica Minolta BIZHUB C652DS - Manual (Page 159)

bizhub C652/C652DS/C552/C552DS/C452 7-11
7.1 System Settings 7
Image Stabilization Setting Specify the type and opportunity of
image stabilization. If [Standard] is se-
lected, normal stabilization is per-
formed during warm-up processing
when a change in the absolute humid-
ity has been detected during warm-up
processing.
If [Color Priority] is selected, color sta-
bilization is performed when the pow-
er has been turned on.
Selecting [Black & White Priority] exe-
cutes monochrome stabilization dur-
ing warm-up when absolute humidity
change is detected during the warm-
up, and then stabilizes color before
performing color print.
Paper Separation Adjust-
ment Adjust the paper position where the two sides are separated for 2-sided
print.
Color Registration Adjust Correct color shifts if they are detected in the print result.
For details, refer to page 7-20.
Gradation Adjustment Adjust irregular gradation levels of print images.
For details, refer to page 7-21.
Image Stabilization Only Stabilize the image by pressing the
[Start] key before performing grada-
tion adjustment.
Print Adjust the gradation when the color
gradation has been changed in a print
image. This function performs adjust-
ment, emphasizing the gradation ex-
pression of an image and the
reproducibility of texts or lines.
Copy Adjust the gradation when the color
gradation has been changed in a print
image. This function performs adjust-
ment to save as many images as pos-
sible in memory.
Scanner Area Adjust the scan range of the scanner.
For details on displaying this item, contact your service representative.
ADF Adjustment Make adjustments for scanning images in the ADF.
For details on displaying this item, contact your service representative.
Line Detection Prior Detection Setting
(bizhub C652/C552/C452) Configure whether to issue an alert
when the slit glass is dirty.
•
Select an alert display format and
contamination detection level.
Prior Detection Setting (front)
(bizhub C652DS/C552DS) Configure whether to issue an alert
when the slit glass (front) is dirty.
•
Select an alert display format and
contamination detection level.
Prior Detection Setting (back)
(bizhub C652DS/C552DS) Configure whether to issue an alert
when the slit glass (back) is dirty.
•
Select an alert display format, con-
tamination detection level and dis-
play timing.
Feed Cleaning Settings Configure whether to remove a dirt on
the slit glass each time one sheet of
paper passes through the ADF when
scanning an original using the ADF.
Trail Edge Adjust Correct a shift if it is detected at the trailing edge of the print result.
Place, 11 e 17 w, 8-1/2 e 11 v, A3 w, or A4 v on the bypass tray, and
then press the [Start] key to print a test pattern.
Settings