7 expert adjustment, Expert adjustment -9 – Konica Minolta BIZHUB C652DS User Manual
Page 157
bizhub C652/C652DS/C552/C552DS/C452
7-9
7.1
System Settings
7
7.1.7
Expert Adjustment
Make adjustments so that output quality is increased.
%
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment].
Changing the "From" Ad-
dress
Restrict
Change Registered Over-
lay
Allow
Biometric/IC card Informa-
tion Registration
Restrict
Restrict Broadcasting
OFF
Factory default
Settings
AE Level Adjustment
Configure the initial value for AE (auto exposure). The higher the setting,
the more that the original background is emphasized.
Printer Adjustment
Adjust the starting print position and defective print images caused by pa-
per type features.
d
Reference
The starting print position is factory-adjusted. Normally, you
are not required to change the set values.
Leading Edge Adjustment
Centering
Leading Edge Adjustment (Du-
plex Side 2)
Centering (Duplex 2nd Side)
Erase Leading Edge
Adjust leading edge erase width.
For details on displaying this item,
contact your service representative.
Vertical Adjustment
Adjust the feed direction zoom ratio of
paper types.
For details on displaying this item,
contact your service representative.
Media Adjustment