Konica Minolta BIZHUB C652DS - Manual (Page 160)

bizhub C652/C652DS/C552/C552DS/C452 7-12
7.1 System Settings 7
User Paper Settings Configure special paper settings for User Paper 1 through 6. Settings to
configure include Basic Weight and Media Adjustment.
For details on displaying this item, contact your service representative.
Erase Adjustment Non-Image Area Erase Opera-
tion Settings Configure Non-Image Area operation
settings.
[Auto]:
Automatically detects the background
density of the original, and selects ei-
ther "Bevel" or "Rectangular" accord-
ingly.
[Specify]:
Allows you to manually specify an
erase method and original density. As
an erase method, select "Bevel" or
"Rectangular". Specify an original
density from five levels.
Factory default
AE Level Adjustment Standard (2)
Leading Edge Adjustment 0.0 mm
Centering 0.0 mm
Leading Edge Adjustment
(Duplex Side 2) 0.0 mm
Centering (Duplex 2nd
Side) 0.0 mm
Media Adjustment Auto
Center Staple Position 0.0 mm
Half-Fold Position 0.0 mm
Tri-Fold Position Adjust-
ment 0.0 mm
Punch Vertical Position Ad-
justment 0.0 mm
Punch Horizontal Position
Adjustment 0.0 mm
Punch Regist Loop Size
Adjustment For Finisher FS-526
Finisher: 0.0 mm
Finisher (for Z folding): 0.0 mm
Post inserter feeder (Upper tray): 0.0 mm
Post inserter feeder (Lower tray): 0.0 mm
For Finisher FS-527: 0
Vertical Punch (Z-Fold) Po-
sition Adjustment 0.0 mm
Horizontal Punch (Z-Fold)
Position Adjustment 0.0 mm
1st Z-Fold Position Adjust-
ment 0.0 mm
2nd Z-Fold Position Ad-
justment 0.0 mm
Post Inserter Tray Size Ad-
justment Auto Detect
Density Adjustment 0
Image Stabilization Only Image Stabilization Only
Image Stabilization Setting Standard
Paper Separation Adjust-
ment 0.0 mm
Settings