beautypg.com

5 enhanced security mode, Required settings, Settings to forcibly changed – Konica Minolta BIZHUB C652DS User Manual

Page 202

background image

bizhub C652/C652DS/C552/C552DS/C452

7-54

7.10

Security Settings

7

7.10.5

Enhanced Security Mode

The enhanced security mode cannot be enabled when any of the current functional settings conflict with the
enhanced security mode.

When the enhanced security mode is enabled, the settings required for the mode or the settings that have
been forcibly switched when entering the mode cannot be changed.

Required settings

To enable the enhanced security mode, the following settings must have been configured.

Settings to forcibly changed

When the enhanced security is enabled, the following settings are forced.

-

The changed settings will not revert when the enhanced security mode is turned off.

-

After the password rules have been changed, any passwords that do not comply with the changed rules
will not be authenticated. For details on the password rules, refer to page 7-51.

-

For details on the network settings to be forcibly changed, refer to the "User's Guide [Network
Scan/Fax/Network Fax Operations]".

Administrator Settings

Required settings

User Authentication/Account Track / General Set-
tings / User Authentication

Select either [ON (External Server)] or [ON (MFP)].

When you enable account track, select [Ac-
count Name & Password] for the account track
input method.

Security Settings / Administrator Password

Set a password complying with password rules.

Security Settings / HDD Settings / HDD Lock Pass-
word

Set an HDD lock password.

[Security] in PageScope Web Connection / PKI
Settings / SSL Setting

Set [Mode using SSL/TLS] to [Administrator
mode] and [User mode].

Set [Encryption Strength] to [AES-256] or
[3DES-168].

Image controller setting

Management function setting

CE password

CE authentication function

HDD installation setting

All the settings above must be configured by your
service representative.

These items must be configured by your service
representative. For details, contact your service
representative.

Administrator Settings

Settings to forcibly changed

System Settings / Restrict User Access / Restrict
Access to Job Settings / Registering and Changing
Addresses

Set to [Restrict].

User Authentication/Account Track / General Set-
tings / Pubic User Access

Set to [Restrict].

User Authentication/Account Track / User Authen-
tication Settings / Administrative Settings / User
Name List

Set to [OFF].

User Authentication/Account Track / Print without
Authentication

Set to [Restrict].

Network Settings / FTP Setting / [FTP Server Set-
tings]

[FTP Server Settings] is not displayed.

Network Settings / SNMP Setting / SNMP v1/v2c
Settings

[Write Setting] is set to [Disable].

Network Settings / SNMP Setting / SNMP v3 Set-
tings

In [Write User], [Security Level] cannot be set to
[OFF].

Network Settings / TCPSocket Settings

[Use SSL/TLS] is set to [ON].

Network Settings / WebDAV Settings / WebDAV
Server Settings / SSL Settings

Set to [SSL Only].

This manual is related to the following products: