Konica Minolta PAGEPRO 9100 - Manual (Page 57)

Loading Media 51
How do I load and print thick stock?
Attention
Do not mix thick stock with any other media in the same tray, as this will
cause printer jamming.
1
In the printer driver (Paper tab, Media Type option), select Thick.
2
If you are in Network Mode, on the control panel, select Operator Control/
MPT Media, and select Thick Stock.
3
Load the new media.
4
Adjust the media guides.
5
Print the thick stock.
How do I load and print transparencies?
Attention
Use only transparencies approved for this printer. For a list of currently
approved media, go to printer.konicaminolta.com. To order approved
transparencies, go to printer.konicaminolta.com.
1
In the printer driver (Paper tab, Media Type option), select Transparency
and select either Letter or A4.
2
If you are in Network Mode, on the control panel, select Operator Control/
MPT Media, and select Transparency.
3
Press the MP Size Select key and scroll to the required transpar-
ency size and select it.
4
Fan a few transparencies.
Fanning a large number will
build up static electricity.
5
Put media face-up in the multi-
purpose tray and adjust the media
guides to the width of the transparencies.
Attention
Improperly adjusted guides may cause poor print quality, media
jams, or printer damage.
6
Print the transparencies.
7
Immediately remove the printed transparencies from the output tray.