Konica Minolta PAGEPRO 9100 - Manual (Page 148)

Requirements 142
Location Requirements
On a surface capable of supporting the printer, accessories,
consumables, and media.
Component Weight
Printer 61.7 lbs (28 kg) or less
Printer with consumables (such as
toner), manuals* 69.8 lbs (31.7 kg) or less
Basic system packaged to ship* 83.7 lbs (38.0 kg) or less
Media 5.2 lbs (1.9 kg) per ream of 20 lb
bond (75 g/m 2 ) paper
Duplexer 4.50 lbs (2.04 kg)
4-bin mailbox 18.50 lbs (8.39 kg)
Optional media feeders* 20.25 lbs (9.2 kg) each (up to three
available)
Printer with duplexer, 4-bin mailbox,
and all three optional media feeders* 153.5 lbs (69.6 kg)
Notes: *Without media.
With these characteristics... But away from...
On a hard, flat, stable, level surface
(±1° or less slant at any point around
the machine).
A surface can be tested for level-
ness with a standard round pencil.
If the pencil rolls, the surface is not
level.
Direct sunlight, heating and cooling
sources, extreme temperature or
humidity changes, wind, dust, open
flames, or items that can easily burn.
Close to an easily accessible
grounded power supply (on an
exclusively dedicated power outlet)
that meets printer specifications.
Near your computer. At the length
6.5' (2 m) or less for an IEEE 1284
bidirectional parallel connection.
A connection to the same electrical
circuit as high-current machines.
Noise-generating equipment, such
as a copier or air conditioner, and
strong magnetic or electromagnetic
fields, such as a refrigerator.
With enough space to allow
adequate ventillation and easy
servicing.
Water, water pipes, liquid (drink)
containers, and corrosive chemicals
or vapors, such as ammonia.
With an ambient temperature range
of 50°–90° F (10°–32° C) and
relative humidity range of 15%–85%
(noncondensating).
Small, loose metal parts, such as
paper clips and staples.
At an altitude of 0–10,170 '
(0–3,100m).
Excessive vibration.